Philips ORD2100B-37 - Manual (Page 6)

6 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the unit.
•
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
• The type plate is located at the bottom or back of this
device.
Switch to standby mode
The device switches to standby mode in the
following situations:
• Press the knob repeatedly to switch to
standby mode.
• No audio input from iPod/iPhone or an
external device over 15minutes.
Set clock
1
In standby mode, press and hold SET TIME
on the back of the device for two seconds.
» [12H] or [24H] begins to blink.
2
Rotate the knob to select 12/24 hour
format.
3
Press the knob to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
The device synchronizes time from iPod/iPhone
automatically when iPod/iPhone is docked.
2 sec.