Philips CCC194AT - Manual (Page 40)

POWER
EJECT
SPEED MEMORY
CABLE
/DBS COMBI
SMART
PICTURE
SLOW F.ADV
INDEX SKIP
SLEEP/
WAKE UP
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
ENTER
SEARCH
VAR.SLOW
MENU STATUS
/EXIT FM CLEAR
1
Press the COMBI button, then press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
TO END PRESS EXIT
40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
● The clock is set. If not, CLOCK MUST BE SET appears.
● Channels are programmed.
● There is a tape in the TV/VCR. Make sure the tape’s record tab
is intact and the tape is long enough to record the program.
● You have completed the steps on pages 38-39.
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may return to step 1.
2
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
● ONCE: The VCR will record a TV program once,
● DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
● WEEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
• You cannot set a timer recording if
DEFEAT RECORDING is ON. Details
are on page 33.
• If CODE ERROR flashes after you
enter the PlusCode programming
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
• CLASH may flash on the screen after
you complete step 2. This means
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not occur.
Helpful Hints
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT ▲▼ CHOOSE B
TO END PRESS EXIT
VCR PLUS+ PROGRAM
PLUS CODE : 89687 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
2
1
3