Philips Original radio ORD7100R with 30-pin connector for iPod-iPhone FM 10W - Manual (Page 12)

10 EN
Store radio stations manually
1
Tune to the target radio station.
2
After two seconds, press the knob.
» PXX is displayed with XX blinking (XX
indicates the sequence number).
3
Turn the PRESET knob to select a
sequence number.
4
Press the knob to confirm.
5
Repeat steps 1-4 to store more radio
stations.
• To overwrite a preset radio station,
store another station with its sequence
number.
• To tune to a stored radio station, turn the
PRESET knob until its sequence number is
displayed.
8 Listen to an
external device
You can also listen to an external audio device,
for example, MP3 player, through this product.
1
Switch the source to .
2
Connect the MP3 link cable between
• the MP3-LINK socket on the back
panel of this product, and
• the headphone jack on the external
device.
3
Play audio on the external device (refer to
its user manual).