Billion Electric Company MYGUARD 7500GL - Manual (Page 36)

myGuard 7500GL 802.11g Security ADSL Router
Chapter 4: Configuration
Configuration
When you click this item, you get following sub-items to configure the ADSL router.
LAN, WAN, System, Firewall, VPN, QoS, Virtual Server and Advanced
These functions are described below in the following sections.
LAN (Local Area Network)
There are four items within the LAN section: Ethernet, Wireless, Wireless Security, Port
Setting
and DHCP Server.
Ethernet
The router supports two Ethernet IP addresses in the LAN, and two different LAN subnets
through which you can access the Internet at the same time. Users usually only have one
subnet in their LAN, so there is no need to configure a Secondary IP address. The default
IP address for the router is 192.168.1.254.
RIP:
RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
30