Philips 220S2SB-00 - Manual (Page 9)

7
2.3 Remove Base Stand and Base
Remove the Base Stand
220S2
Place the monitor face on a safe surface, release
the stand lock and pull the base stand away from
the base column.
220S2 plus
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Extend the monitor base to its maximum
height.
-65
65
70mm
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
3. Release the lock of base stand then pull the
base stand away from the base column.
DON’T
DON’T
DON’T