Philips 10FF3CMI-37 - Manual (Page 23)

24
Set time and date
1
In [Setup]>[Options]>[Time and Date],
select [Set time].
2
Press OK to confi rm.
3
Press / / / and OK to enter the
current time of the PhotoFrame.
4
Press OK to confi rm.
5
Repeat steps 1 to 4 to set the current date
of the PhotoFrame.
Set time and date format
You can set the time and date format of the
PhotoFrame.
1
In [Setup]>[Options]>[Time and Date],
select [Set time format], then press OK to
confi rm.
2
Press / to select the time format.
[12 Hour]
[24 Hour]
3
Press OK to confi rm.
4
Repeat steps 1 to 3 to set the date format.
[DD/MM/YY]
[MM/DD/YY]
Set show clock
You can use the PhotoFrame as a clock.
•
•
•
•
4
Press OK to confi rm.
Protect/Unprotect content of
memory card
You can enable the delete function on a storage
device available on the PhotoFrame. To avoid
deleting photos on a storage device, you can
also disable the delete function on a storage
device.
1
In the main menu, select [Setup], then
press OK to confi rm.
2
Select [Memory Card] and press OK to
confi rm.
3
Select [Delete enable] or [Delete disable]
and press OK to confi rm.
EN