Philips 10FF3CMI-37 - Manual (Page 10)

11
Connect power
Note
When you position the PhotoFrame, ensure that the
power plug and outlet are easily accessible. •
1
Connect the power cord to the DC
socket of the PhotoFrame and to a power
supply socket.
a
b
a
b
3 Get started
Caution
Use the controls only as stated in this user manual. •
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial numbers. Find the model
number and serial number of this PhotoFrame
at the back or the bottom of your PhotoFrame.
Write these numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
To place the PhotoFrame on a fl at surface,
attach the supplied stand to the back of the
PhotoFrame.
1
Insert the stand into the PhotoFrame.
2
Turn the stand clockwise 45 degrees to
attach it to the PhotoFrame.
English
EN