Philips VRA601AT99 - Manual (Page 24)

24 Playing
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR/TV light will
appear on the display panel. If it
does not, press the VCR/TV button.)
Then press the PLAY/o button.
• Other playback options and fea-
tures are on pages 33-41.
Helpful Hints
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The POWER, VCR/TV and CST. IN
lights will appear on the display panel. If the tape’s record tab has
been removed, playback will start automatically.
6
Press the EJECT button to remove the tape.
3
If playback does not start automatically, press the
PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REWIND/{ button to rewind the tape.
1 Turn on the TV.
2 Insert a tape in the VCR.
6
3
4
5
POWER EJECT VCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR SLOW MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
TIME SEARCH SPEED