Cassette recorder, English – Philips AZ1005-17 User Manual

Page 12

English

AZ 1007 /17

page

CASSETTE RECORDER

1. Set the source selector to TAPE.
2. Press STOP•OPEN

9 / to open the cassette holder and

insert a recorded cassette.

3. Close the cassette holder.
4. Press PLAY

1 to start playback.

5. Adjust the sound using the VOLUME and DBB controls.
6. To interrupt playback press PAUSE

;. To resume, press the

button again.

7. By pressing

5 or 6,fast forwarding of the tape is possible in

both directions.To stop fast forwarding, press STOP•OPEN

8. To stop the tape, press STOP•OPEN

9 /

™ The buttons are automatically released at the end of the

tape, except if PAUSE

; has been activated.

9. With the source selector in TAPE/

POWER OFF

position, the set

is switched off when all the cassette buttons are released.

• Recording is permissible insofar as copyright or other rights of

third parties are not infringed.

• This deck is not suitable for recording on CHROME (IEC II) or

METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.

• The recording level is set automatically. Altering the VOLUME

and DBB controls will not affect the recording in progress.

• At the very beginning and end of the tape, no recording will

take place during the 7 seconds, when the leader tape passes
the recorder heads.

• To protect a tape from accidental erasure have the tape in

front of you and break out the left tab. Recording on this side
is no longer possible. To record over this side again, cover the
tabs with a piece of adhesive tape.

General information on cassette recording

PLAYING A CASSETTE

RECOR

PLAY

SEARCH

STOP-OPEN

PAUSE

DYNAMIC BASS BOOST

SHUFFLE

POWER

OLUME

VOLUME

DBB

DYNAMIC

BASS BOOS