Philips SCF314-02 - Manual (Page 13)

12
Second Pump
Control cable
socket
Twin tubing
port
Double pumping? Complete the next step
with your second assembled pump body.
Single pumping? Complete the next step
with the remaining tube.
3a
4
5
3b
Push the double pumping connector onto the pump
body so that it sits firmly on top of the silicone
diaphragm. Securely attach the other transparent tube
to the double pumping connector. When the breast
pump is fully assembled, the Second Pump will mimic
simultaneously the speed and suction of the First
(Control) Pump.
If you are single pumping, you can keep
the transparent tube out of the way by
attaching it to the white clip.
Securely attach the twin tubing
to the ports on the pump motor.
Connect the control cable
into the adjacent socket.
Connect the electric adaptor to power socket
on the pump motor.
Then connect the wall plug cord to the electric
adaptor and insert the plug into the wall outlet.
See section titled, ‘Twin electronic breast pump Parts
Guide’ on page 1 for a description of First (Control)
Pump and Second Pump
Connecting the Electronics