Philips SCF314-02 - Manual (Page 10)

Parts you will need for this step:
White valve Clear silicone diaphragm
Double pumping? Assemble two pumps as shown below.
Single pumping? Assemble one pump as shown below.
Pump body
9
Before assembling, make sure that you have correctly washed and sanitized the pump.
See section titled ‘Cleaning and Sanitizing Your Pump’ on page 6.
1
2
Insert the white valve into the pump body,
so that it fits securely into the small round
hole. Make sure the pointed side of the
valve is facing down.
Fit the clear silicone diaphragm into the
pump body. Ensure a perfect seal around
the rim by pressing down with your
fingers. (This is easier if assembled while
the diaphragm is wet.)
Assembling the Pump Body