Philips FWM575-37B - Manual (Page 27)

27
English
Clock/Timer
IMPORTANT!
– Use CLOCK•TIMER on the set to set the
clock and timer.
– To set clock in the Eco Power mode, press
and hold STANDBY-ON/ECO POWER
2
on the set for 3 seconds or more to switch
to normal standby mode first before
proceeding with the procedures below.
View clock
The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
● Press CLOCK•TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, " --:--" is
displayed.
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("
AM 12:00" or "00:00" for
example)
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source
mode, press
CLOCK•TIMER twice.
2
Press PROGRAM repeatedly to select clock
mode.
➜ " AM 12:00" or "00:00" starts flashing.
3
Press ALBUM -/+а б on the system
repeatedly to set the hour.
4
Press TITLE -/+н/л on the system
repeatedly to set the minute.
5
Press CLOCK•TIMER again to store the
setting.
➜
The clock star ts working.
To exit without storing the setting
●
Press STOP Ç on the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
pg001-pg031_FWM575-Eng-37 2006.2.8, 13:17 27