Philips FWM575-37B - Manual (Page 20)

20
English
Radio Reception
Tuning to radio stations
1
Press TUNER to select TUNER mode.
➜ " TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW (AM).
3
Press and hold ALBUM -/+а б until the
frequency indication star ts to change, then
release.
➜
The display will show "
SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press ALBUM -/+
а б briefly and repeatedly until optimal
reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1
Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
● Press TITLE -/+н/л PRESET to select
the desired preset number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until " AUTO" is
displayed.
➜
PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
●
Press PROGRAM or STOP Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
pg001-pg031_FWM575-Eng-37 2006.3.6, 10:40 20