Basic functions, 1 powering on/off, 2 selecting signal source – Philips BDH5021V-27B User Manual

Page 19: Ba sic fu n c t io n s, Powering on/off, Selecting signal source, 1 powering on / off

User Manual BDS4241V/BDH4241/BDH5021V

Main Input

Move [- CH +] Select [- VOL +] Exit [MENU]

VIDEO 1
VIDEO 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2

5. BASIC FUNCTIONS

5.1 POWERING ON / OFF

Make sure the monitor is plugged into the wall outlet with the supplied

power cord.

If the power is plugged in, the STATUS LED on the control panel will

illuminate in red color.

Using Front Panel or Remote Control

1. Press the POWER key on the front panel or the remote control.

=> The monitor will now turn on after a brief pause. The STATUS

LED will now turn green to indicate power on status.

2. Turn off the power by pressing the POWER key on the front panel

or the remote control again.

5.2 SELECTING SIGNAL SOURCE

Using Front Panel or Remote Control

1. Press the

INPUT key on the from panel or the AV key on the

remote control.

2. Pressing the

CH+ or CH- key will cycle the monitor through all

available input signal sources in the following order:

VIDEO1 - VIDEO2 - VIDEO - S-VIDEO - COMPONENT

- RGB - DVI

3. Press the

VOL+ or VOL- button to select the source.

This manual is related to the following products: