Philips 30PW9100D-37B - Manual (Page 11)

T he HDMI Input Jacks provide
HDMI Inputs at 1080i for
accessories like HD Receivers.
For the best high derfinition con-
nect to HDMI. If your receiver
does not have a HDMI, connect
to HD CVI.
Connect an HD Receiver to
the HDMI Input:
Please refer
to your Receiver’s Owner’s
Manual for more detailed
hookup options.
1 If using a Satellite Dish,
Cable signal or Antenna
signal, connect the 75
ohm round cable from a
Satellite Dish to the
SATELLITE IN and/or the
Cable and Antenna signals
to the ANTENNA “A” or
“B” IN on the back of the
HD Receiver.
2 Connect another 75 ohm
round cable
from the OUT
TO TV jack on the HD
Receiver to the 75 ohm IN
on the back of the TV.
3 Connect a HDMI cable
from the DVI OUT on the
HD Receiver to the HDMI
Input jack on the back of
the TV.
4 With both the HD Receiver
and the television ON,
press the CH + or CH –
button
on the remote to
tune to the HDMI Channel
and view the video input
from the HDMI supplied
signal.
NOTE: Please use a certified
HDMI cable for optimal picture
and sound quality
HDMI I NPUT C ONNECTION 9
OUT TO TV SATELLITE IN
DIGITAL AUDIO OUTPUT VCR CONTROL S-VIDEO
PHONE JACK
VIDEO AUDIO
L
L
R
R ACCESS CARD
ANTENNA B IN ANTENNA A IN
2
1
3
1
1
Coaxial
Cable Lead-in
from Satellite
Dish
Coaxial
Cable
Lead-in from
Cable Outlet,
Converter Box, or
VHF/UHF
Antenna
Coaxial Cable
Lead-in from
Alternate RF
Signal Source
Back of TV