beautypg.com

Cvi) i – Philips 30PW9100D-37B User Manual

Page 10

background image

C

OMPONENT

V

IDEO

(CVI) I

NPUT

C

ONNECTIONS

C

omponent Video inputs provide

for the highest possible color

and picture resolution in the play-

back of digital signal source materi-

al, such as with DVD players. The

color difference signals (Pb, Pr) and

the luminance (Y) signal are con-

nected and received separately,

which allows for improved color

bandwidth information (not possible

when using composite video or

S-Video connections).

1

Connect the Component (Y,

Pb, Pr) Video OUT

jacks from

the DVD player (or similar

device) to the (Y, Pb, Pr) in(put)

jack on the TV. When using the

Component Video Inputs, it is

best not to connect a signal to the

AV in Video Jack.

2

Connect the red and white

AUDIO CABLES

to the Audio

(left and right) output jacks on

the rear of the accessory device

to the Audio (L and R) AV1 in

Input Jacks on the TV.

3

Turn the TV and the DVD (or

digital accessory device) ON.

4

Press the CH + or CH –

buttons

to scroll the available

channels until CVI appears in

the upper left corner of the TV

screen.

5

Insert a DVD disc into the DVD

player and press the PLAY

button on the DVD Player.

The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi-
nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions and
connection details.

H

ELPFUL

H

INT

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

L/Mono

VIDEO

COMPONENT VIDEO INPUT

S-VIDEO

OUT

OUT

OUT

L

R

AUDIO

VIDEO

COMP VIDEO

Y

Pb

Pr

2

1

3

5

4

Component

Video

Cables

(Green,

Blue, Red)

Audio

Cables

(Red &

White)

Accessory Device

Equipped with

Component Video

Outputs

Back of TV

The CVI connection will be dominate over the AV1

in Video Input. When a Component Video Device is

connected as described, it is best not to have a video

signal connected to the AV1 in Video Input jack.

8

This manual is related to the following products: