Philips DC199B-37 - Manual (Page 15)

English
15
Basic Functions
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON B (or B on the
remote control).
➜ The system will switch to the last selected
source.
● Press either USB/AUX, iPod or TUNER on
the system /remote control.
➜ The system will switch to the selected source.
Switching the system to standby
mode
● Press STANDBY-ON B (or B on the
remote control).
➜ The volume level (up to a maximum volume
level of 12), last selected mode, source and tuner
presets will be retained in the system's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a USB connected device has reached the
end of the last track and no control is operated.
Adjusting volume and sound
1
Press VOLUME -/+ to decrease or increase the
volume.
➜ Display shows the volume level VoL and a
number 0-32.
2
Press DBB to switch bass enhancement on or
off.
➜ If the DBB is activated, DBB appears.
3
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and
MUTE appears.
● To activate sound reproduction you can:
– press
MUTE again;
– adjust the volume controls;
– change source.
Adjusting the display backlight
During playback or standby mode, press
REPEAT ALARM once or more to toggle
between
BRIGHT ➜ MEDIUM ➜ OFF.
pg001-025_DC199_37-Eng 2007.11.22, 15:52 15