Philips 3000 series LED-LCD TV 32PFL3509 32" class-po - Manual (Page 30)

EasyLink
This function allows you to operate the linked functions between our
brand Devices with a EasyLink feature and this Unit connecting through
an HDMI cable. You must connect this Unit to our brand EasyLink devices
and be sure it's EasyLink setting is also set to On.
1
Use H I to select EasyLink, then press OK.
On
On
On
Auto TV on
Device list
Auto device off
USB
Language
Features
Setup
Sound
Picture
On Device control
Master EasyLink
2
Use H I J K to select the item you want to adjust, then press
OK.
Set the Master EasyLink On or Off. The following additional settings will
be grayed out when you set them to Off.
Master EasyLink
Off Disables All EasyLink.
On
Selects if you have connected an
External Device that is compatible
with the EasyLink function.
You can set your connected EasyLink device to Turn Off by interlocking
from this Unit’s Power.
Auto device off
Off
Your connected EasyLink device
stays On even if the Unit goes into
Standby mode.
On
Your connected EasyLink device
Turns Off Automatically when the
Unit goes into Standby mode.
This Unit will Turn On when the Power On Signal is sent from your
connected EasyLink device.
Auto TV on
Off
This Unit stays in Standby mode
even if you Turn On your
connected EasyLink device.
On
This Unit Turns On Automatically
when you Turn On your
connected EasyLink device.
You can operate some functions such as Disc Playback or call up the menu
of the connected devices, by using this Unit’s Remote Control.
Device control
Off Disables the device control.
On
PLAY K / STOP C / FWD D /
REV E / SKIP G / SKIP H /
PAUSE F / LINK / HIJ K /
OK / BACK / the NUMBER
buttons / RED / GREEN / BLUE /
YELLOW can be used to control
your connected fun-Link devices
by this unit’s remote control.
Device list
This function lets you see the product model number or name of
Connected Devices.
Use H I to select the desired EasyLink devices listed on the TV screen,
then press OK.
Your connected EasyLink device will be Turned On if the device is in
Standby mode.
Back Refresh Input Change
Blu-ray disc player HDMI2
DVD recorder HDMI1
USB
Language
Features
Setup
Sound
Picture
30 .
English