Clock – Philips 32PF9630A-37B User Manual
Page 21
17
Most of the TV channels are not transmitting clock
information. There are few cable channels but they are at
the end of the channel ring. There is no clock transmission
in antenna channels. In such cases either clock extraction
is taking a long time or there is no clock.
Clock
This allows you to use your TV as a clock.
Note: Adjusting the clock is necessary for the correct working of Lock after (See TV
settings, Channels, p. 23) features.
Auto clock mode
&
Select
Clock
in the Setup menu.
é
Press the cursor right to select the
Auto clock mode
.
“
Press the cursor right to instruct the TV to get the time automatically or
manually.
Auto clock channel
(only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be
found by the TV. Typically time can be found on PBS as well as some other
channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel
menu item can not be selected.
Time - Day
(only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If
Auto clock mode Manual
has been selected, and no clock search has
been done, the system will keep the entered time and day.
Time zone
(only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time.
&
Select
Time zone
with the cursor down.
é
Press the cursor right to select your local time zone.
Daylight saving
(only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals.
This menu item allows you to disable the automatic setting of daylight
saving time.This is useful if you live in an area or state where daylight saving
is not applied, but you receive channels from other areas where daylight
saving signals are broadcasted.
&
Select
Daylight saving
with the cursor down.
é
Press the cursor right to select
Automatic
for automatic clock correction
for daylight saving time, based on specially broadcasted signals.
“
Select
Off
to disable automatic clock correction based on the specially
broadcasted signals.