Philips 32PF9630A-37B - Manual (Page 20)

16
Source
This menu allows you to identify the accessory devices you have connected to
the external inputs/outputs.
& Select Source in the Setup menu.
é Press the cursor right to enter the list of types of devices connected to the
selected input.
“ Select the accessory device with the cursor up/down.
When you select AV1 , AV2 , AV3 , HDMI1 , HDMI2 , Side or Digital Audio
In , a list appears allowing you to identify which type of accessory device is
attached to this input.The TV detects the presence of the connected device
and the signal is routed appropriately.
Digital Audio
Select Digital Audio In when the TV expects digital audio for a connected
device to come from a Digital audio input.
Make your selection of the source to which the device with digital audio
input has been connected.
In addition to accepting audio input via Digital Audio In, the TV can output
Digital audio via the
DIGITAL AUDIO OUT connector to an external
amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In,
you can connect it with a single cable to the TV’s
DIGITAL AUDIO OUT .
See Connect Accessory Devices, Digital Surround Receiver, p. 34.