Digital tuner, Reviewing the programme, Erasing a programme – Philips MC118C3799 User Manual
Page 9: Cd player and cd handling, Tuning to radio stations, Disappears from the display
9
MC 118 / 22 page 9
English
5 To start playback of your CD programme, press
PLAY•PAUSE
2; (on the remote control 2).
Reviewing the programme
• In STOP mode, press and hold down PROGRAM on the
set or remote control, for a while until the display shows
all your stored track numbers in sequence.
Erasing a programme
You can erase the programme by:
– pressing STOP
9 once in the STOP position;
– pressing STOP
9 twice during playback;
– pressing the CD door open;
•
PROGRAM
disappears from the display.
CD player and CD handling
• If the CD player cannot read CDs correctly, use a
commonly available cleaning CD to clean the lens before
taking the set to repair. Other cleaning methods may
destroy the lens.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature can
cause condensation to cloud over on the lens of your CD
player. Playing a CD is then not possible. Do not attempt
to clean the lens but leave the set in a warm
environment until the moisture evaporates.
• Always keep the CD compartment closed to avoid dust
on the lens.
• To take a CD out of its box, press the centre spindle
while lifting the CD. Always pick up the CD by the edge
and return the CD to its box after use to avoid
scratching and dust.
• To clean the CD, wipe in a straight line from the centre
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
• Never write on a CD or attach any stickers to it.
DIGITAL TUNER
Tuning to radio stations
1 Select TUNER source.
™
TUNER is displayed briefly.
2 Press REPEAT/
BAND
once or more to select your
waveband.
3 Press down on TUNING
5 or 6 and release button.
™ The radio automatically tunes to a station with
sufficient reception. Display indication during
automatic tuning:
SEARCH.
™ If a FM station is received in stereo,
STEREO
is
shown.
4 Repeat step 3 if necessary until you find the desired
station.
• To tune to a weak station, press TUNING
5 or 6
briefly and repeatedly until you have found optimal
reception.
TIMER
CD
PROGRAM
M C 1 1
8 M I C
R O S
Y S T E
M
OPEN•CLOSE
VOLUME
INCREDIBLE
SURR
OUND
DBB
DSC
INTERA
CTIVE SOUND
STANDBY
ON
TIMER
ON • OFF
PROGRAM
SELECT
RDS
CLOCK
SHUFFLE
REPEA
T
BAND
IR
SENSOR
X