Philips 60PP9910-17 - Manual (Page 22)

C
ONNECTING
Y
OUR
D
EVICES
AV2
U se AV2 for any device which uses a
composite video or S-Video connec-
tion.
Optimized for: Personal Video
Recorder
Other Options: VCR, DVD, etc....
Refer to the directions-for-use manual for
your device for further information on
connections.
1 Connect the VIDEO OUT
jack or S-Video jack on the rear
of the device to the INPUT AV2
VIDEO or S-VIDEO jack on the
rear of the TV.
2 Connect the audio output
R(ight) and L(eft) jacks on
the rear of the device to the AV
2 AUDIO jacks on the rear of
the TV.
NOTE: If the device is a mono
(nonstereo) unit, connect only
the left audio cable, which usually
has a white connector. You will
also need to select MONO in
AUDIO menu, see panel 12 in
the Advanced Instructions.
3 Press the AV button on the
remote control to open the
AV Source menu. Then press
the CURSOR UP or DOWN
button to select the AV2 source
for the viewing of materials
from your device. Press CUR-
SOR RIGHT button to confirm.
ANALOG
18