Philips 60PP9910-17 - Manual (Page 21)

AV1
U se AVI for any device which uses a
composite video or S-Video connec-
tion.
Optimized for: VCR
Other Options: Cable Box, DVD, etc...
Refer to the directions-for-use manual for
your device for further information on
connections.
1 Connect the VIDEO OUT
jack or S-Video jack on the rear
of the device to the INPUT AV1
VIDEO or S-VIDEO jack on the
rear of the TV.
2 Connect the audio output
R(ight) and L(eft) jacks on
the rear of the device to the AV
1 AUDIO jacks on the rear of
the TV.
NOTE: If the device is a mono
(nonstereo) unit, connect only
the left audio cable, which usually
has a white connector. You will
also need to select MONO in
AUDIO menu, see panel 12 in
the Advanced Instructions.
3 Press the AV button on
the remote control to open
the AV Source menu. Then
press the CURSOR UP or
DOWN button to select the
AV1 source for the viewing of
materials from your device.
Press CURSOR RIGHT button
to confirm.
ANALOG
C
ONNECTING
Y
OUR
D
EVICES
17