Philips 50PF9731D-37 - Manual (Page 50)

L Pr H
R Pb V
DIG
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
AV1
ANTENNA 75
o
AV1 :
L + R + VIDEO
RECORDER
OUT
OUT IN
IN
2
1
OUT
Cable box
OUT
3
Connect a recorder and satellite receiver or Cable box with A/V outputs
48
1. Connect the satellite antenna cable or the Cable TV cable 1 to the satellite receiver’s or cable
box’s IN jack.
2. Connect the AV cables 2 to the satellite receiver’s or cable box’s AV OUT jacks and to the
recorder’s AV IN jacks.
3. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
VIDEO , AUDIO L and R input AV1 jacks on the TV.
4. Connect another RF cable 3 from the output out of your recorder to the TV’s input
CABLE/ANTENNA 75 Ω x jack.
5. Select the equipment you have connected in the Setup menu, Select your source, p. 24 and link
it to the AV connector you have connected your equipment to.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the S-VIDEO input of AV1 and connect
the audio cables to the AUDIO L and R input jacks of AV1.
When using the S-VIDEO connector do not connect any device to the AV1 VIDEO jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.