Philips BTM630-37B - Manual (Page 3)

Enjoy
C
Playing a disc
1
2
3
Insert a disc into the disc loader.
➜ Make sure the label side is facing up.
In DISC mode, press ÉÅ to start playback.
To stop playback, press 9 .
1
2
3
Insert the USB device’s USB plug into the socket or fully insert the SD/MMC card into
the SD • MMC slot on the top of the system.
Press SOURCE once or more (or USB/CARD on the remote control) to select USB/
CARD .
Play the available audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1)
,
memory cards.
Operating a Bluetooth-enabled device via the system
1
2
3
4
5
6
Place a Bluetooth-enabled device for pairing within 8 meters from the system.
Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to
select the Bluetooth source.
Press and hold ANSWER/PAIRING on the top of the system or the remote control
for more than 3 seconds.
Set the Bluetooth-enabled device to search for other available Bluetooth devices until it
recognizes “PHILIPS BTM630”.
Select “PHILIPS BTM630” and wait until you hear a double beep from the system and the
Bluetooth icon turns on.
➜ Enter “0000” when prompted for a keyword.
For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the
system with the
ANSWER/PAIRING , REJECT and 9 buttons respectively.
● For a paired A2DP device, you can enjoy music from it with the ÉÅ , ¡ / ™ , S / T and
9 buttons via the system.
BTM630 QSG_Eng 2007.6.18, 11:14 3