Setting the clock 1 2 3 – Philips BTM630-37B User Manual
Page 2
AC power adaptor
AM loop
antenna
FM wire antenna
Connect the AM and FM antennas.
Connect the AC power adaptor of the system.
1
2
Tips
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
2
1
Setting the clock
1
2
3
In standby mode, press
PROG
on the system (or
PROG/CLOCK
on the remote control).
➜
SET CLOCK is displayed briefly. Then, 12HR or 24HR is displayed.
Press
ALBUM•PRESET +/-
on the system (or
3
/
4
on the remote control) to select
clock mode. Press
PROG
on the system (or
PROG/CLOCK
on the remote control)
to
confirm.
➜
The clock digits for the hours continue to flash.
Press
ALBUM•PRESET +/-
on the system (or
3
/
4
on the remote control) to set the
hours.
Press
PROG
on the system (or
PROG/CLOCK
on the remote control) again.
➜
The clock digits for the minutes flash.
Press
ALBUM•PRESET +/-
on the system (or
3
/
4
on the remote control) to set the
minutes.
Press
PROG
on the system (or
PROG/CLOCK
on the remote control) to confirm the
time.
4
5
6
BTM630 QSG_Eng
2007.6.18, 11:14
2