Philips 27 in Color TV - Manual (Page 11)

11
C omponent Video inputs provide for the
highest possible color and picture resolu-
tion in the playback of digital signal source
material, such as with DVD players. The
color difference signals (Pb, Pr) and the lumi-
nance (Y) signal are connected and received
separately, which allows for improved color
bandwidth information (not possible when
using composite video or S-Video connec-
tions).
1 Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD play-
er (or similar device) to the (Y, Pb, Pr)
in(put) jacks on the TV. When using
the Component Video Inputs, it is best
not to connect a signal to the AV1 in
Video Jack.
2 Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accesso-
ry device to the Audio (L and R) AV1
in Input Jacks on the TV.
3 Turn the TV and the DVD (or digital
accessory device) ON.
4 Press the AV button to scroll the
available channels until CVI appears in
the upper left corner of the TV screen.
5 Insert a DVD disc into the DVD player
and press the PLAY
ᮣ button on the
DVD Player.
VOL
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
S-VIDEO
OUT OUT OUT
L
R
AUDIO VIDEO COMP VIDEO
Y Pb
Pr
CVI
2
1
3
5
4
U
SING THE
CVI (C
OMPONENT
V
IDEO
I
NPUT
) J
ACKS
The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi-
nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions
and connection details.
H
ELPFUL
H
INT
AUDIO CABLES
(RED/WHITE)
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
BACK OF TV
ACCESSORY DEVICE
EQUIPPED WITH CONPONENT
VIDEO OUTPUTS.
The CVI connection will be dominate over the AV1 in Video Input.
When a Component Video Device is connected as described, it is best
not to have a video signal connected to the AV1 in Video Input jack.
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AV1 (or CVI),
AV2, SVHS, Front, or currect channel.
Note: The Component Video and Audio
cables needed for this connection are not
supplied with your TV. Please contact your
dealer or Philips at 800-531-0039 for infor-
mation about purchasing the needed cables.
c c C
HECK
I
T
O
UT