Belkin F5D8053 - Manual (Page 12)

10
Installing and Setting up the Adapter
10
A.7 When prompted, turn off your
computer and plug in your Adapter.
Your installation is now complete.
A.8
When the installation completes,
click on “Finish”.
A.9
The Found New Hardware Wizard
might appear within 3–15 seconds.
If it does, continue to follow the
prompts. Select “Locate and install
the driver software” to continue.
A.10
You might see a screen similar to
the one pictured below. This DOES
NOT mean there is a problem. Our
software has been fully tested and
is compatible with this operating
system. Select “Install this driver
software anyway” and follow the
on-screen instructions.
Next, a screen appears indicating
that hardware installation is taking
place; then, another indicates that
the process is complete.