Hyundai H-1410 - Manual (Page 5)

4
SKIP AND SEARCH MODE
· Press the NEXT button once to skip to next track. Keep pressing to search for a particular at high speed forward. Release the button to resume normal
play.
· Press the BACK button once to skip back to previous track. Keep pressing to search for a particular point at high speed backward. Release the button
resume normal play.
REPEAT MODE
· Press the REPEAT button once for single track repeat playing and the repeat indicator will flash.
· Press twice for all track repeat playing and the repeat indicator will light on.
· To cancel repeat play, press REPEAT button until the repeat indicator turn off.
PROGRAM MODE
· Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP
button.
· Press the PROGRAM button, the program LED indicator will light up and the display will show the program no.
· Select a desired track by using the NEXT and BACK buttons.
· Press PROGRAM button to confirm.
· Repeat steps 2 and 3 to enter additional memories into the program if necessary.
· When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.
NOTE: The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply.
· To remove the CD from the unit, press the STOP button and press OPEN button to open the CD door then remove the CD.
· To turn off the CD player set Function switch to TAPE position.
MP3 operation
· Set FUNCTION switch to CD (MP3) position.
· Open the CD door. Put a MP3 disk into the CD compartment and close the CD door.
· In MP3 playback mode all functions are available as in CD operation mode.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.
Recording
RECORDING FROM RADIO
· Slide the Function switch to RADIO position.
· Tune to the desired station by turning the Tuning control knob.