Hyundai H-1410 - Manual (Page 3)

2
Power supply
BATTERY OPERATION
· Open the battery compartment cover.
· Insert 6 batteries (UM-1). Please observe correct battery polarities or the set will not work.
· Close the battery compartment cover.
AC OPERATION
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· Plug the corresponding end of cord into the AC socket on the rear of the set.
· Insert the plug into power supply.
CAUTION:
· When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
· Always switch off the unit when not in use.
· Always unplug the appliance from power supply, when no use long time.
Stereo headphone connecting
· For private listening, insert 3.5 mm headphone into the stereo headphone jack.
· Adjust volume control to the appropriate level as desired.
· When the stereo headphone jack is plugged, speaker will disconnect automatically.
Radio operation
· Set Function switch to RADIO position.
· Select your desired broadcasting band with Band switch.
· Press NEXT/TUNE-UP button or NEXT/TUNE-UP button and then release the button when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
· To receive a weak broadcast signal press the NEXT/TUNE-UP or NEXT/TUNE-UP button by one press at a time and adjust the frequency you wish to
receive.
RADIO STATION MEMORY
· 12 broadcast stations of FM band, 6 AM and 6 LW stations can be stored to the preset memory.
· During tuner mode, find a desired station.
· Press MEM button to make the channel display appear.