2 heating milk – Philips Saeco Milchaufschäumer User Manual
Page 6

5.2 Heating milk
You can also heat up milk without frothing it. In this
case you do not need to use the frothing coil.
1
Pull one side of the frothing coil off the
frothing rod (1) and then remove the other
side from the frothing rod (2).
2
Put the lid onto the milk jug (1) and turn it
clockwise to fix it (2).
3
To start the heating process, press the button
for hot milk.
• The button lights up.
4
When the hot milk is ready, the appliance
switches off automatically.
D
Note:
If you want to prepare hot frothed milk or hot
milk again straightaway, the milk jug needs to
cool down for a few minutes before you can
use it again. As long as the milk jug is still hot,
• To prepare cold frothed milk, press the
button for cold frothed milk. The button
lights up blue.
4
When the milk froth is ready, the appliance
switches off automatically.
D
Note:
If you want to prepare hot frothed milk or hot
milk again straightaway, the milk jug needs to
cool down for a few minutes before you can
use it again. As long as the milk jug is still hot,
the temperature limiter makes sure that the
appliance cannot be operated. You can rinse
the inside of the milk jug with cold water to let
it cool down faster.
5
Turn the lid anticlockwise (1) and lift it off the
milk jug (2).
C
Caution:
Be careful if you have prepared hot frothed
milk, as it has a temperature of approx. 70°C
and may cause scalding.
6
Pour out the frothed milk or remove it from
the milk jug with the spatula supplied.
6
4222_200_0544_2_DFU-booklet_128x180_v1.indd 6
8/12/11 11:16 AM