Selecting tracks, Fast track selection, Fast searching (audible) – Blaupunkt SANTA CRUZ MP36 User Manual

Page 18: Random track play (mix), Scanning tracks (scan)

ANSK

GLISH

DEUT

SCH

FRAN

AIS

ALIAN

NEDERLANDS

VENSKA

ESP

AÑOL

PORTUGUÊS

The drive draws in the CD automatically.
You must not hinder or assist the drive as it

draws in the CD.

Gently close the control panel whilst

exerting a little pressure until you feel

it click into place.

The CD starts playing.

Note:
If the vehicle ignition was switched

off prior to inserting the CD, you must

switch the device on first with the but-

ton 1 to start the playback.

If a CD is already inserted in the drive,

press the

SOURCE button 4 repeat-

edly until "CD" appears on the display.

Playback begins from the point at which it

was last interrupted.

Selecting tracks

Press one of the arrow buttons : to

select the next or previous track.

If you press the or button : once, the

player will play the current track again from

the beginning.

Fast track selection

To quickly select tracks backwards or for-

wards,

press and hold down the or

button : until fast track selection

backwards / forwards begins.



Fast searching (audible)

To fast search backwards or forwards,

press and hold down the or button

: until fast searching backwards / for-

wards begins.

Random track play (MIX)

Press the

5 MIX button ;.

"MIX CD" appears briefly on the display and

the MIX symbol is displayed. The next ran-

domly selected track will then be played.

Cancelling MIX

Press the

5 MIX button ; again.

"MIX OFF" appears briefly on the display

and the MIX symbol disappears.

Scanning tracks (SCAN)

You can scan (briefly play) all the tracks on

the CD.

Press the

MENU button 9 for longer

than two seconds.

The next track will then be scanned.

Note:
You can set the scanning time. For

further information, please read the

section entitled "Setting the scanning

time" in the "Radio mode" chapter.

Cancelling Scan and continuing listening

to a track
To end the scanning process,

press the

MENU button 9.

The currently scanned track will then con-

tinue to be played normally.



CD mode

02_SCruz_ValenciaMP36_eng.indd 47

07.02.2006 11:22:27 Uhr