Philips BlueTouch-Schmerztherapiegerät - Manual (Page 16)

charging using the micro usB socket
You can also charge the BlueTouch Pain Relief Patch by plugging the
USB plug into a USB port on your computer. Charging with the USB cable
connected to the computer can take up to 8 hours.
1 Insert the micro USB plug into the USB socket on the BlueTouch
Pain Relief Patch.
2 Insert the standard USB plug into a USB port on your computer.
, When the micro USB cable is connected properly, the BlueTouch
Pain Relief Patch beeps once and the charging light starts flashing
green slowly.
3 Remove the micro USB cable from the micro USB socket on the
BlueTouch Pain Relief Patch when the charging light turns solid green
to show that charging is completed.
using your Bluetouch Pain Relief Patch
treatment schedule
Always stick to the treatment schedule in section ‘Treatment modes,
duration and intensity’ in this chapter. Do not treat more than twice
a day.
The BlueTouch Pain Relief Patch has been designed for daily use. You can
use it when you feel pain. It is important, however, that you stick to the
treatment schedule in section ‘Treatment modes, duration and intensity’
in this chapter and do not treat more often than twice a day. If you follow
this treatment schedule, you do not exceed the maximum daily light dose
of 90 J/cm².
treatment options
The following treatment options are possible:
- two treatments of the lower back per day
- two treatments of the upper back per day
- one treatment of the lower back and one treatment of the upper back
per day
Note: You can use the BlueTouch Relief patch twice in a row for two treatments
of 15 minutes, 20 minutes or 30 minutes with a short break. To start the
second treatment, press the mode button to switch on the device again.
treatment modes
treatment modes, duration and intensity
Modes No. of treatments per day and
treatment duration
Intensity
1: low 2 x 30 min. 50%
2: medium 2 x 20 min. 75%
3: high 2 x 15 min. 100%
English
16