Beko WMA 657 S - Manual (Page 21)

EN 21
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Open the loading door, place the
laundry inside and fill with detergent.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press “Time delaying” buttons “+”
and “-” (Figure 2-8) to set your
desired time delay. Time delaying
symbol (Figure 3-13h) will flash.
4. Press “Start/Pause/Cancel” button
(Figure 2-10). Then the time delay
starts to count down. Time delaying
symbol (Figure 3-13h) will light up.
Start symbol (Figure 3-13j) will light
up.
The “:” in the middle of the displayed
time delay will start flashing.
• More laundry may be loaded or
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol (Figure 3-13h) fades and
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
the countdown:
1. Press “Start/Pause/Cancel” button
(Figure 2-10). “:” in the middle of the
screen will stop flashing. Standby
symbol (Figure 3-13k) will light up.
Time delaying symbol (Figure 3-13h)
will flash. Start Symbol (Figure 3-13j)
will fade.
2. Press “Time delaying” buttons “+”
and “-” (Figure 2-8) to set your
desired time delay.
3. Press “Start/Pause/Cancel” button
(Figure 2-10). Time delaying symbol
(Figure 3-13h) will light up. Standby
symbol (Figure 3-13k) will fade. Start
symbol (Figure 3-13j) will light up.
4. The “:” in the middle of the displayed
time delay will start flashing.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press “Start/Pause/Cancel” button
(Figure 2-10). The “:” in the middle
of the displayed time delay will stop
flashing.
2. Start symbol (Figure 3-13j) will fade.
The standby symbol (Figure 3-13k)
and the time delaying symbol (Figure
3-13h) will flash.
3. Press time delaying button “-”
(Figure 2-8) to decrease the desired
time delay. Program duration after
30 minutes shall be displayed.
4. Press “Start/Pause/Cancel Button”
(Figure 2-10) to start the program.
Starting the program
1. Press “Start/Pause/Cancel” button
(Figure 2-10) to start the program.
2. The start symbol (Figure 3-13j)
which indicates that the program
has started will light up.
3. The door locks and the door locked
symbol (Figure 3-13i) will light up.
4. Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has
started from will light up (Figure
3-13f).
Progress of program.
The progress of a running program is
shown through a number of symbols on
the screen.
• At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that is lit up at the far right of
the series of symbols indicates the
step that is being carried out.
Prewash
When “Prewash” auxiliary function is
selected, prewash symbol will light up to