BenQ Z2 - Manual (Page 117)

Menus 101
Memory Status
Shows the amount of used and available memories in the phone and on
the miniSD Card.
Tools
Alarm
To set an alarm, follow the steps below:
1. Select an alarm.
2. Push the Joystick right or left to turn the status on.
3. Push the Joystick down to change the following settings as needed.
Frequency
Select the days on which you want the alarm to sound.
Press the Joystick button (OK) to select or deselect.
Press (Done) to save your selections.
Time
Used to enter the time when the alarm will go off.
Time Duration
Used to set the length of the alarm.
Alarm Tone
Used to set the alarm's ringtone.