KEMP VMware ESX - Manual (Page 17)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 17 / 22
VLM for VMware ESX, ESXi and vSphere
Installation Guide
Figure 3-14: Appliance Vitals
14. Click the System Configuration menu option.
15. Click the eth0 menu option within the Interfaces section.
16. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the
network facing interface of the LoadMaster, in the Interface Address input field.
17. Click the Set Address button
18. Click the eth1 menu option within the Interfaces section
19. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farm-
side interface of the LoadMaster, in the Interface Address input field.
20. Click the Set Address button
This interface is optional, depending on the network configuration.
21. Click on the Local DNS Configuration > Hostname Configuration menu option.
22. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
23. Click on the Set Hostname button.
24. Click on the Local DNS Configuration > DNS Configuration menu option.