Water pitcher components, Filter change instructions, Pitcher storage and maintenance – Water Inc Water Filtration Pitcher User Manual
Page 2
W-961 Rev. 6-09
Distributed Internationally by Water, Inc.
1044 East Del Amo Blvd.
Carson, CA 90746
800.322.WATER (9283)
www.bodyglove.waterinc.com
®
Lid
Pistol-Style Handle
Pitcher
Hinged
Pour Spout
Reservoir
Filter Pack
Hinged Lip
To change the filter pack, simply unscrew it from the water reservoir, and insert a new pack following the same
instructions as found in “pitcher instructions before use.”
FILTER CHANGE INSTRUCTIONS
Water Pitcher Components
PITCHER STORAGE AND MAINTENANCE:
When the pitcher will not be used for an extended period of time (90-days or longer), flush the filter pack by
adding one tablespoon of chlorinated bleach to about one-half gallon of water, which is the capacity of the top
reservoir.
Remove the reservoir and filter pack assembly, and place on a paper towel to dry. Re-assemble and stow until
ready for re-use. It is recommended to periodically clean the pitcher reservoir with mild detergent.
For any service related questions, contact Water, Inc. at 1-800-322-WATER (9283), extensions 115 or 132. To
locate a dealer who carries replacement filters or to purchase online, please visit www.waterinc.com.
Lid with Hinged
Pouring Spout and Lip
Water Reservoir
Filter Pack Flushing
Assembly
Filter Pack
(C)
(B)
(A)
(E)