AAEON PCM-LN02 - Manual (Page 27)

C o m p a c t B o a r d P C M - L N 0 2
2.18 RJ-45 Ethernet #2 (CN6)
Pin Signal Pin Signal
R1 GPHY_MDIO0+ R2 GPHY_MDIO0-
R3 GPHY_MDIO1+ R4 GPHY_MDIO1-
R5 TCD0 R6 TCD1
R7 GPHY_MDIO2+ R8 GPHY_MDIO2-
R9 GPHY_MDIO3+ R10 GPHY_MDIO3-
L1 ACT_LED L2 +3.3 Volt.
L3 SPD100_LED L4 SPD1K_LED
2.19 Voltage Input Connector (CN7)
Pin Signal
1 +12 Volt.
2 Ground
3 Ground
4 N/C
2.20 ATX Power Connector (CN8)
Pin Signal Pin Signal
1 N/C 2 N/C
3 Ground 4 +5 Volt.
5 Ground 6 +5 Volt.
7 Ground 8 N/C
9 +5 Volt. Standby 10 +12 Volt.
11 N/C 12 -12 Volt.
Chapter 2 Quick Installation Guide 2-14