BT Freestyle 255 - Manual (Page 44)

If you have not already set the day and
time, you will need to do this so that
you will know when each message was
received, see page 8.
Call Screening
When a caller is leaving a message
Screen? appears on the display.
Pressing
allows you to monitor the
message being left without the caller
hearing you.
You can then press
to accept the
call or to stop monitoring.
Clr
Menu
3. Press to hear the menu choices.
4. Press to switch the answering machine on or off.
The machine confirms by announcing “Answer on” or
“Answer off”.
5. Press and hold to return to standby mode.
Outgoing messages
This is the message your caller hears when the answering
machine picks up their call. Your BT Freestyle 225 comes with
two pre-recorded outgoing messages to choose from. You can
also record your own outgoing messages.
Answer and Record
This allows your caller to leave a message for you. The pre-
recorded message is “Hello, your call cannot be taken at the
moment, so please leave your message after the tone.”
Answer Only
This does not allow your caller to leave a message.
The pre-recorded message is “Hello, your call cannot be taken
at the moment, and you cannot leave a message, so please
call later.”
Clr
0
1
44 Answering machine
BT Freestyle 225 UG – Edition 01 – 02.10.07 – 8390
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
8523 Freestyle 225 UG Iss.2 [1] 21/11/07 10:51 Page 44