BT Freestyle 255 - Manual (Page 26)

Insert a pause in a number
You may need to do this if you are
connected to a switchboard. When
entering a number, usually after
entering the switchboard access code
(e.g. 9) press and hold 0 until P appears
in the display.
Dial/view a number
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
Or, search alphabetically, using the keypad to enter the first
letter of the name you want, then scroll to the exact entry
using the
or buttons.
3. Press , then to display
Select
and to confirm.
4. The selected entry will be displayed ready to be dialled out.
Press or to dial.
Edit a directory entry
1. Press to open the directory. The first entry is displayed.
2. Press or to scroll through the directory to the entry
you want.
3. Press , then to display
Change
and press again
to select.
4. The stored number is displayed followed by a flashing cursor.
Edit the number using to delete incorrect digits and enter
new ones using the keypad, then press .
Menu
Clr
Menu Menu
Menu Menu
26 Directory
BT Freestyle 225 UG – Edition 01 – 19.09.07 – 8390
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
Searching for a name
Example: To search for Oliver, press 6
three times to display the first entry
beginning with O, then use and
to scroll to Oliver.
8523 Freestyle 225 UG Iss.2 [1] 21/11/07 10:51 Page 26