Getting started 5 – BT 7780 User Manual

Page 5

Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780

6. Enter the 4 digit PIN code of the base station you are

registering to (BT Elements base default 0000) and press

When the base is located, your handset will display the base ID
number, press

to confirm registration to this base or

cancel by pressing

The handset is automatically allocated the next available
handset number which is displayed when in standby mode.

If registration is unsuccessful, the handset will return to standby mode. Try

moving closer to the base you want to register to and following the registration

procedure again.

Wall mounting (optional)

If you wish you can wall mount the handset and charger.

IMPORTANT

Before you wall mount, please check that:

• you are not drilling into any hidden wiring or plumbing
• the mains power adaptor will reach the plug socket

BT are not responsible for any damage / injury caused while attempting to wall

mount your phone.

1. Drill two holes in the wall for the 2 screws provided using the

wall mounting bracket as a template.

2. Insert the wall plugs provided into the holes and then insert

the 2 screws, one into each hole. Leave a gap between the
head of the screw and the wall (approx 3mm).

Menu

If you experience any problems, please call the Helpline on 0870 605 8047

Getting started