Storing stations, Storing stations automatically (travelstore), Listening to stored stations – Blaupunkt LONDON MP37 7 647 553 310 User Manual
Page 16: Scanning receivable stations (scan), Setting the scanning time

50
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons
1 - 5
5 for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
Press and hold down the
BAND•TS but-
ton
= for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Note:
If the priority for traffi c information is
active (the display shows the traffi c
jam symbol), only traffi c information
stations are stored.
u
u
u
u
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons
1 - 5
5.
The stored station is played if it can be
received.
Scanning receivable stations
(SCAN)
You can use the scan function to play all
the receivable stations briefl y. You can set
the scanning time in the menu to between
5 and 30 seconds.
Starting SCAN
Press and hold down the
MENU button
; for longer than two seconds.
The radio scans the next receivable station.
The current memory bank and "SCAN" ap-
pear briefl y on the display followed by a
fl ashing display of the current station name
or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the
MENU button
;.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the
MENU button
;.
Press the or button
: repeat-
edly until "SCAN TIME" appears on the
display.
Press the or button
8 to open the
menu.
Set the desired scan time with the
or button
8.
u
u
u
u
u
u
u
u
Radio mode
02_LondonMP37_gb.indd 50
02_LondonMP37_gb.indd 50
29.11.2006 16:21:10 Uhr
29.11.2006 16:21:10 Uhr