Blaupunkt LONDON MP37 7 647 553 310 - Manual (Page 15)

49
EN
GLISH
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the or button
:.
The radio tunes into the next receivable
station.
Note:
If the priority for traffi c information is
active (the display shows the traffi c
jam symbol), the next traffi c informa-
tion station is set.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
To change the set frequency in small incre-
ments,
briefl y press the or button
8.
To change the set frequency quickly,
press and hold down the or button
8 for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
u
u
u
Note:
The convenient RDS function must be
activated before you can use this fea-
ture.
Press the or button
8 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU button
;.
Press the or button
: repeatedly
until "SENS HI" or "SENS LO" appears
on the display.
The display shows the currently set sensi-
tivity level. "SENS HI3" indicates the high-
est sensitivity, "SENS LO1" the lowest.
Set the desired sensitivity with the
or button
8.
When you have fi nished making your
changes,
press the MENU button
;.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.
u
u
u
u
u
Radio mode
02_LondonMP37_gb.indd 49 02_LondonMP37_gb.indd 49 29.11.2006 16:21:10 Uhr 29.11.2006 16:21:10 Uhr