Blaupunkt COBURG RCR 168 - Manual (Page 19)

37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
SENS LO Adjusts seek tuning
sensitivity."LO" stands for
local reception."DX" stands
for distant reception.
Select "LO 3" if you want to
receive strong stations in
the local area, select "DX
1" if you want to tune into
weaker stations which are
further away.
CLOCK 24 Switches between 12-h and
24-h clock display.
CLOCKSET Sets the clock manually.
Press << >> to select
hours/minutes. Press /
to adjust the flashing value.
TIMER Switches on a selected ra-
dio station at a selected
time.
ON VOL Sets the turn-on volume.
Press << >> to adjust the
turn-on volume as desired.
MUTE Changes the mute volume.
BEEP Changes the volume of the
acknowledgement tone
(beep) between 0 and 9.
(0 = off)
RM ON Radio Monitor
If the Radio Monitor
function is active during fast
winding of the tape, the unit
will switch to the radio and
play the station listened to
last.
SCANTIME Use this function to set the
scan time for the radio or
cassette player from 5 to 20
seconds.
BL SKIP Switches the Blank Skip
function off and on; there
must be at least 10 secon-
ds of blank tape between
songs.
AUX Select AUX ON if you wish
to connect a Discman or
Walkman.
AUX NAME Allows you to name an ex-
ternal audio source (e.g. a
discman).
DISPLAY Switches the display on or
off while the car radio is tur-
ned off.
Overview of the DSC factory
settings
LOUDNESS 3
BAS CENT 50 Hz
TA VOL 40
REG OFF
SENS DX1
CLOCK CLOCK 24
CLOCKSET
TIMER
OFF
ON VOL 20
MUTE 10
BEEP 3
RM ON
SCANTIME 10 seconds
BL SKIP ON
AUX OFF
DISP OFF
Cob/Portof/Colo gb® 30.05.2002, 10:16 Uhr 37