beautypg.com

3 get started, Install filters – Philips Luftreiniger User Manual

Page 7

background image

7

English

3

Remove all the filters from the purifier.

4

Remove all packaging material from the

filters.

5

Put the filters back into the purifier.

3 Get started

Install filters

The air purifier comes with all filters fitted

inside, but you have to remove the packaging

of the filters before you can use it. Remove all

filters, unpack them, and place them back into

the air purifier as described below.

Tip

When you remove or insert filters, place the

purifier against a wall for more stability.

Note

Insert the filters in the correct position.

Make sure you place the filters in the order of

HEPA filter, activated carbon filter, and finally

the pre-filter.

Make sure that the side with the tag is pointing

towards you.

1

Place your fingers in the recesses of the

side panels and gently pull the top part of

the front panel towards you.

2

Gently pull the bottom of the panel out

(1), then lift the top part of the front

panel towards you (2).

1

2

EN

English