Switching on/off – Blaupunkt BOLOGNA DJ51 User Manual
Page 8
31
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Switching on by means of cassette
insertion
If there is no cassette in the deck when
the device is switched off,
➮
press the
button,
9
.
The flip-release panel opens.
➮
Insert the cassette with the open
side to the right gently into the
drive until you can sense some re-
sistance.
The cassette is automatically drawn into
the drive.
As the cassette is drawn in, it must nei-
ther be held back nor assisted.
➮
Close the panel with gentle pres-
sure until you feel it engage.
The device switches on. Cassette play
starts.
Switching on/off
There are various ways of switching the
car radio on and off, as described be-
low.
Switching on/off using the ignition
If the car radio is correctly connected to
the ignition and has not been switched
off using the button
3
, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮
To do so, press the button
3
.
Note:
●
To protect the vehicle battery, the
unit switches off automatically after
one hour.
Switching on/off using the flip/
release panel
➮
Remove the flip/release panel.
The unit switches itself off.
➮
Replace the flip/release panel once
more.
The device switches on. The most re-
cent setting (radio, Cassette, CD-chang-
er or AUX) is restored.
Switching on/off using the button
3
➮
To switch the unit on, press the but-
ton
3
.
➮
To switch the unit off, hold the but-
ton
3
down for more than two
seconds.
The car radio is now switched off.
SWITCHING ON/OFF