Blaupunkt BOLOGNA DJ51 - Manual (Page 19)

42
Skipping Blank Tape
You can automatically skip sections of
blank tape that last longer than 10 sec-
onds. This requires the blank skip func-
tion to be activated.
Note:
●
The blank skip can only be set if a
cassette is being played.
Switching Blank Skip On / Off
➮
Press the MENU button
8
.
➮
Press the or button
:
until
“BLANK SKIP” appears in the dis-
play.
➮
Press the or button
:
to
switch the blank skip function on or
off.
➮
Press the MENU button
8
or OK
;
twice.
Selecting Tape Type
If you are playing a “Metal” or “CrO
2
”
tape, you should set the tape type se-
lector to “MTL ON”.
To select the tape type
➮
Press button 1 MTL
>
.
Either “MTL ON” or “MTL OFF” will ap-
pear briefly in the display.
Dolby* B Noise Reduction
You should switch on the Dolby func-
tion whenever you play tapes recorded
using the Dolby B process.
➮
Press button 6
>
.
When the Dolby function is switched on,
shows in the display.
*Noise reduction system manufactured un-
der licence from Dolby Laboratories. The
word Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
CASSETTE MODE