Billion Electric Company 7202 - Manual (Page 84)

the data.
Write Community: Specify a name to be identified as the Write Community, and an IP
address. This community string is checked against the string entered in the configuration file.
Once a string name is matched, users from this IP address are able to view and modify data.
Trap Community: Specify a name and an IP address. This community string is checked
against the string entered in the configuration file. Once a string name is matched, users
from this IP address are sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication, and define access rights from the identified
IP address. Once authentication has succeeded, users from this IP address are able to view
and modify data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security" but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II):
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
82