Billion Electric Company 7202 - Manual (Page 7)

Virtual Server:
You can specify which services are visible to outside users. The myGuard router detects an
incoming service request and forwards it to the specific local computer for handling. For
example, you can assign a PC in a LAN to act as a Web server inside and expose it to the
outside network. Outside users can browse inside the web server directly while it is
protected by NAT. A DMZ host setting is also provided for local computers exposed to the
outside Internet network.
Dynamic Host Configuration Protocol (DHCP) Client and Server
On a WAN site, the DHCP client obtains an IP address from the Internet Service Provider
(ISP) automatically. On a LAN site, the DHCP server allocates a range of client IP
addresses, including subnet masks and DNS IP addresses and distributes them to local
computers. This provides an easy way to manage the local IP network.
Rich Packet Filtering
This feature filters the packet based on IP addresses as well as Port numbers. Filtering
packets to and from the Internet provides a higher level of security control.
Static and RIP1/2 Routing
An easy static routing table or RIP1/2 routing protocol supports routing capability.
Simple Network Management Protocol (SNMP)
SNMP allows convenient remote management of the router.
Web-based GUI
A web-based GUI offers easy configuration and management. User-friendly and with on-line
help, it also supports remote management capability for remote users to configure and
manage this product.
Firmware Upgradeable
You can upgrade the myGuard router with the latest firmware through its web-based GUI.
5