Briggs & Stratton 073002 - Manual (Page 14)

OPERATION
14
Stopping the Water Pump
1. Move engine speed lever to “Slow” ( ) position
(Figure 13).
2. Push on/off switch to “Off” position (Figure 13).
3. Turn white fuel valve to “Off” position (Figure 12).
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump (Figure 15).
3. Remove plug from top of pump and flush internal
components of pump with clean water (Figure 16).
4. Replace both plugs and finger tighten.
Figure 15 — Remove Drain Plug
Figure 16 — Remove Plug from Top of Pump and Flush
DO NOT stop engine by moving choke lever to “Choke”
position. Backfire, fire or engine damage could occur.
CAUTION